duo video with MCG-100

[jgold]

How do you configure the MCG-100 to pass both Duo video and SVGA/XGA graphics between Tandberg units?

Any assistance would be most appreciated.

[robertk]

You can't...

Either use People*content with polycom systems or no support for it together with other wendors, such as Tandberg.

If we are lucky, Polycom will implement the H239 protocol in the MGC real soon, and then it might work. (Since Tandberg anounced H239 support as of July 12 2004)

//Robert

[Sean Lessman]

You can't...

Either use People*content with polycom systems or no support for it together with other wendors, such as Tandberg.

If we are lucky, Polycom will implement the H239 protocol in the MGC real soon, and then it might work. (Since Tandberg anounced H239 support as of July 12 2004)

//Robert

There is support for Duo Video on both IP and ISDN in the Accord MCU. The ISDN method is extremely hard to set up and use. As for XGA, even harder to set up and you will get different results depending on whether or not it is ISDN, IP, main video or duo video.

I also hope they will move to H.239.

Sean

[robertk]

Sean,

isn't that just support for the first versions of DUO video, where you had to manually dial the DUO-call?

I wouldn't call that DUO-VIDEO, since DUO-VIDEO really wasn't usable until TANDBERG made it work automagically. :) (Then we had to wait for a year or so until Tandberg decided to have AUTO DUO-VIDEO as DEFAULT setting :)

//Robert

[Sean Lessman]

Sean,

isn't that just support for the first versions of DUO video, where you had to manually dial the DUO-call?

I wouldn't call that DUO-VIDEO, since DUO-VIDEO really wasn't usable until TANDBERG made it work automagically. :) (Then we had to wait for a year or so until Tandberg decided to have AUTO DUO-VIDEO as DEFAULT setting :)

//Robert

On ISDN it requires two separate conferences (Accord implementation). On IP it is 'inband'. The RADVision, Ezenia and TANDBERG MCUs do 'inband' on both IP and ISDN (Ezenia is ISDN only).

Sean