Error Codes

[keithfulcher]

Do any of you know of a list that has all of the Error Codes for an IMUX/ Isdn. I believe the codes are pretty standard, but I have not been able to find a complete list.

[senthil]

00 Normal Disconnect
01 Unassigned (Unallocated number)
02 No route to specified transit network
03 No route to destination
04 Send special information tone*
05 Misdialled trunk prefix*
06 Channel unacceptable
07 Call awarded and being delivered in an established channel
08 Preemption*
09 Preemption, circuit reserved for re-use*
16 Normal call clearing
17 User busy
18 No user responding
19 User alerting, no answer
20 Subscriber absent*
21 Call rejected
22 Number changed
23 Redirection to new destination*
24 Exchange routing error*
26 Non-selected user clearing
27 Destination out of order
28 Invalid number format
29 Facility rejected
30 Response to STATUS ENQUIRY
31 Normal unspecified
34 No circuit/channel available
38 Network out of order
39 Permanent frame mode connection out of service*
40 Permanent frame mode connection operational*
41 Temporary failure
42 Switching equipment congestion
43 Access information discarded
44 Requested circuit/channel not available
46 Precedence call blocked*
47 Resource unavailable, unspecified
49 Quality of service unavailable
50 Requested facility not subscribed
53 Outgoing calls barred within CUG*
55 Incoming calls barred within CUG*
57 Bearer capability not authorized
58 Bearer capability not presently available
63 Service or option not available, unspecified
65 Bearer capability not implemented
66 Channel type not implemented
69 Requested facility not implemented
70 Only restricted information bearer capability available
79 Service or option not available, unspecified
81 Invalid call reference value
82 Identified channel does not exist
83 A suspended call exists, but this identity does not
84 Call identity in use
85 No call suspended
86 Call having the requested call identity has been cleared
87 User not a member of CUG*
88 Incompatible destination
90 Non-existent CUG*
91 Invalid transit network selection
95 Invalid message, unspecified
96 Mandatory Information Element is missing
97 Message type non-existent or not implemented
98 Message not compatible with call state, or not implemented
99 Information Element non-existent or not implemented
100 Invalid Information Element contents
101 Message not compatible with call state
102 Recovery on time expiry
103 Parameter not implemented*
111 Protocol Error, unspecified
127 Interworking, unspecified

Senthil.

[Sean Lessman]

Do any of you know of a list that has all of the Error Codes for an IMUX/ Isdn. I believe the codes are pretty standard, but I have not been able to find a complete list.

good reference click here (http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/dbook/disdn.htm)

Sean