TMS 11 System Templates

[Shawn Jones]

Looking at using templates to reset the video input on the systems to the Main Camera every night so that the next morning, if someone tries to make a call, it is on the Main cam to start with (can you tell I just had this happen this morning?). I have Classic 6000's, 6000 MXP with WAVE II's, and 6000MXP HD Cam systems.

I believe I found the right setting (startup source, or call source), but was unclear on the Input Number (some are 1-6) to assign. All of the WAVE II systems have the camera in SVid #1 (assume input 1), but the HD cams, is that input 5 or 6, or 0?

Also is there a setting for just doing this once a day, say at 2am?

Thanks

[vbhere]

Did u ever get a solution?

[Shawn Jones]

Nope. I have a call in to my service provider on something else TMS related, and will inquire about that as well.

[Sean Lessman]

All of the WAVE II systems have the camera in SVid #1 (assume input 1), but the HD cams, is that input 5 or 6, or 0?

If you use the HD digital input, it logically replaces input 1 (S-Video). Should be input 1.

Sean