Polycom V500 over ADSL+. Gratefull for any advice please.

[PeDaSP]

Hi folks - very gratefull for your advice...

I'd like to offer a basic VC solution to my serviced office clients. This will supplement the webcams they may have on their desktops PC via AIM, SightSpeed, Yahoo etc..

So I'm thinking of a Polycom V500 with an external, fixed IP address. This would run via ADSL+ - which is giving us 13Mbps down and around 1.8Mbps up.

The spec of the V500 is a max of 512Mbps.

Q1: Will all this work OK via ADSL?

Q2: Am I right in thinking that most companies and VC bureaux will be able to connect to a Polycom V500 as standard?

Q3: Folks may be using the ADSL line to surf the web at the same time. So I'm going to enable and tweek the QoS on our Netgear Layer 3 switch and Speedtouch ADSL+ router. But I know this is a tricky area (difficult to control download QoS etc..). Will this help?

Q4: Any other advice?

Thanks - and Happy Holidays :)

[ROYAL]

Dear sir,

I have installed one vsx 5000 in our cutomers permises.From there i am able to make the calls and receive the video calls in a LAN.when ever we are trying to make a video calls from outside LAN(public ip's & Test sites) call is connecting and there are able to recive our video and audieo,But we are unable to recive the audieo and video from the farend .
The system is installed under "WATCHGUARD X-500" firebox in that what are ports to open for effictive video conferencing.(any additional settings is required so far the vsx 5000 system and firewall)

we tryed with
80-89,1503,1718,1719,1720,1731,8080-tcp ports

1024-65535 -udp ports opened then also iam not able to recive farend audio & video then all the incoming and outgoing (TCP & UDP)ports opened in the fire wall,then also iam not able to recive farend audio & video .




if any one has faced this type of problem please help on this issue what are ports to be open in Watchguard x-500 firewall and any additional settings should require for the Watchguard x-500 and vsx 5000 system.

Warm Regards
:)
Lokanadha Reddy.A
project & Customer Engineer
lokanadh.reddy @gmail.com

[PeDaSP]

er.... why on earth have you high-jacked my posting with your question????

Please delete it and start a new post of your own.

Thank you