letlovein
04-30-2008, 05:47 AM
Dear All Brothers.
I am facing a problem while configuring the videoconferencing on LAN Enviornemnt.
i have envirnment on which first there is router then there is pix then there is isa then Core switch, after that distribution switch then come access layer switch
the problem was tht on earliest my client were able to call on wan but wan users were not able to call inside lan. so i mapped the polygom's private ip with one public ip on pix device...the problem was solved. and outside user were able to call inside.
but there is still a problem that i am using intervlan routing the vlan enviornment is given below:
pix isa and core are on vlan 2.
there is a vlan from core to distribution i,e vlan 3
from distribution to access there is vlan 4...
the private ip which i mapped was from vlan 2.
but when i map vlan 4's ip with the public ip on pix..it never works...
i donno why...i m stuck with it :(
I am facing a problem while configuring the videoconferencing on LAN Enviornemnt.
i have envirnment on which first there is router then there is pix then there is isa then Core switch, after that distribution switch then come access layer switch
the problem was tht on earliest my client were able to call on wan but wan users were not able to call inside lan. so i mapped the polygom's private ip with one public ip on pix device...the problem was solved. and outside user were able to call inside.
but there is still a problem that i am using intervlan routing the vlan enviornment is given below:
pix isa and core are on vlan 2.
there is a vlan from core to distribution i,e vlan 3
from distribution to access there is vlan 4...
the private ip which i mapped was from vlan 2.
but when i map vlan 4's ip with the public ip on pix..it never works...
i donno why...i m stuck with it :(