JFCOMEngineer
06-19-2008, 07:41 AM
Not sure if this belongs here or in ISDN, so cross posting it in both, Mod, if is doesn't belong here please move it for me.
Is there a way to specify what numbers the Adtran Atlas 890 sends back to a calling system for a multi-B channel, BONDed call? I am at a DoD site using encryption, so plugging the PRIs directly into the MPS isn't an option.
My system is provisioned with a 95B1D NFAS group on the network side, and a span of XXX-XXX-8200 thru 8299. I have configured the dial plan so that when a call comes in on XXX-XXX-8201, the call will be routed to the Dual Video card in slot 10, port one. When a system dials in on XXX-XXX-8201, my 890 answers and then sends back XXX-XXX-8200 five times for a 6 channel, 384K BONDed call. The problem is two fold, first, 4 of the 5 numbers ring busy, and secondly, the 890 doesn't seem to know what to do with the incoming call on XXX-XXX-8200.
I think what I need to do is be able to specify what numbers the Adtran is sending out for the other 5 DS0s so that I can put thus numbers in the User term side of the dial plan, but I haven't figured out how to do that. Any suggestions?
Is there a way to specify what numbers the Adtran Atlas 890 sends back to a calling system for a multi-B channel, BONDed call? I am at a DoD site using encryption, so plugging the PRIs directly into the MPS isn't an option.
My system is provisioned with a 95B1D NFAS group on the network side, and a span of XXX-XXX-8200 thru 8299. I have configured the dial plan so that when a call comes in on XXX-XXX-8201, the call will be routed to the Dual Video card in slot 10, port one. When a system dials in on XXX-XXX-8201, my 890 answers and then sends back XXX-XXX-8200 five times for a 6 channel, 384K BONDed call. The problem is two fold, first, 4 of the 5 numbers ring busy, and secondly, the 890 doesn't seem to know what to do with the incoming call on XXX-XXX-8200.
I think what I need to do is be able to specify what numbers the Adtran is sending out for the other 5 DS0s so that I can put thus numbers in the User term side of the dial plan, but I haven't figured out how to do that. Any suggestions?