Bonding 3 BRI lines on Tandberg 1500 MXP

[eninen8]

Hi, Im new in setting up video conference unit. We have set-up two tandberg 1500 MXP each with 3 BRI lines with different numbers from Telco.
My question is, how can I make a call to bond the 3 BRI lines. If I dial on any 3 numbers one at a time of the other unit I get connected only with 128K for every call. Can I dial the three BRI numbers at the same time?

Thanks.

[robertk]

You must configure the units with the corresponding dial in numbers for each isdn line.

So if system A is connected to ISDN lines

1001
1002
1003

Those numbers must be entered into System A´s ISDN network settings. The order wich the ISDN lines are connected to your unit is important, since you must match the numbers to the inputs on the Tandberg.

//Robert