View Full Version : What hardware for the IP and ISDN connections on the video conferencing system?
vimascom
11-20-2008, 11:27 PM
Dear Friends,
I have a system included one RMX1000, four VSX7000. These are worked over IP. Now I need to add a VSX7000 to this system but this VSX7000 works over ISDN.
So what hardware and software that I need to deploy the system?
robertk
11-21-2008, 06:27 AM
Dear Friends,
I have a system included one RMX1000, four VSX7000. These are worked over IP. Now I need to add a VSX7000 to this system but this VSX7000 works over ISDN.
So what hardware and software that I need to deploy the system?
You need a ISDN H320 to IP H323 GATEWAY that your RMX1000 can use to dial over ISDN.
Most gateways also need a GATEKEEPER to work properly.
//Robert
vimascom
11-21-2008, 09:02 PM
You need a ISDN H320 to IP H323 GATEWAY that your RMX1000 can use to dial over ISDN.
Most gateways also need a GATEKEEPER to work properly.
//Robert
Could you specify that hardware or software, please?
Thank you very much.
Joe Vallender
11-21-2008, 09:32 PM
You could add ISDN capability to your RMX and bring in a PRI circuit or several. Then your RMX could be the gateway between IP and ISDN.
robertk
11-22-2008, 03:57 AM
You could add ISDN capability to your RMX and bring in a PRI circuit or several. Then your RMX could be the gateway between IP and ISDN.
Can you add a ISDN card to the RMX1000?
I thought that was only possible on the RMX2000.
If that is possible that would probably be the optimal hardware for this setup.
//Robert
vimascom
11-22-2008, 08:52 PM
Can you add a ISDN card to the RMX1000?
I thought that was only possible on the RMX2000.
If that is possible that would probably be the optimal hardware for this setup.
//Robert
I don't saw this ISDN card option for RMX1000 so I'm looking for some help, please.
robertk
11-23-2008, 04:36 AM
I don't saw this ISDN card option for RMX1000 so I'm looking for some help, please.
Maybe you should contact the person who sold you the RMX in the first place?
A good ISDN-H323 Gateway is the Codian 3201.
//Robert
vimascom
11-27-2008, 08:32 PM
Dear Friends,
I have a system included one RMX1000, four VSX7000. These are worked over IP. Now I need to add a VSX7000 to this system but this VSX7000 works over ISDN.
So what hardware and software that I need to deploy the system?
Please help me.
vBulletin® v3.7.2, Copyright ©2000-2009, Jelsoft Enterprises Ltd.