VTC Port Numbers.,

[praveen8986]

Hi,
Can anyone list out the Video Conference Port numbers.

[robertk]

I guess you are asking for ports used in a H.323 call:

1024-65535 UDP
1024-65535 TCP


Regards

//Robert

[robertk]

But he didn't say for which brand or model or even what standard he was asking about :)

And even TANDBERGs use different ports depending on what equipment you are using. Not everything that has the TANDBERG logo on it use those ports, only the endpoints AND even so, you need to specify that the endpoint use H.323 STATIC PORTS for that range to work.

He was ASKING for "video conference port numbers" and according to H.323 standard, correct me if I'm wrong, is the range 1024-65535 UDP and TCP.
:)

//Robert

[shabonaa]

polycom endpoints using the following ports:

TCP: 1719,1720
TCP/UDP: 3230 to 3237

[Sean Lessman]

polycom endpoints using the following ports:

TCP: 1719,1720
TCP/UDP: 3230 to 3237


Does that also apply if the unit has a built in multipoint? I think those ports only work for a single call.

The port range given above for TANDBERG are for endpoints and allowing for the built in Multisite.

Sean

[JFCOMEngineer]

But he didn't say for which brand or model or even what standard he was asking about :)

And even TANDBERGs use different ports depending on what equipment you are using. Not everything that has the TANDBERG logo on it use those ports, only the endpoints AND even so, you need to specify that the endpoint use H.323 STATIC PORTS for that range to work.

He was ASKING for "video conference port numbers" and according to H.323 standard, correct me if I'm wrong, is the range 1024-65535 UDP and TCP.
:)

//Robert

Isn't it tedious always being right? The OP asked the wrong question, which you have illustrated by answering the question that was asked. I suspect that he wants to know what holes to poke in a firewall to make his particular piece of technology work, and that is what he needs to ask, preferable with specifics on all of the equipment and software involved.
Regards,

Wes

[sirius]

If you want to know which ports you need to open in your firewall for a successful basic H.323 call, that is:
TCP 1720
TCP 1024-65535 (dynamic)
UDP 1024-65535 (dynamic)

And, instead of using dynamic port, you can choose to use fixed port on your PLCM end-point which is:
VSX series:
TCP 3230-3235
UDP 3230-3253

HDX series
TCP 3230-3235
UDP 3230-3285

You may also want to open port 5001 for People+Content IP.